Working with roofing membranes

This membrane EPDM, PVC membrane and the membrane TVE. The attraction of polymer
roofing membranes for the consumer lies in their unique qualities. Durability
Polymeric roofing membranes remarkably durable in comparison with other
types of coatings for flat roofs (such as bitumen and mastic materials).
For example, a major American manufacturer of roofing membranes company
Carlisle offers a guarantee on the polymer membrane to 20 years. Roof Company
Style, which is the official dealer of the corporation "Carlisle SinTek Inc."
and also engaged in installation of roof and waterproofing work using
roofing membrane Carlisle, gives a guarantee on their work for 10 years. In 1993,
d Institute of Hydraulic them. Vedeneeva issued a conclusion that the polymeric roofing
Carlisle membranes can be used for 50 years without losing their quality.
Low weight and thickness of material, of which the roofing membrane
allows them to perform their functions with a thickness of from 1 st to 2 mm. In
result, one square meter of the polymer membrane has an average
weight of about 1, 3 kg. The area of ​​roofing material is on a roll
much more than the bitumen materials. So
membrane roofing gives a very easy and does not create unnecessary burdens on
building construction, and transportation costs and rigging of roofing material
are the lowest compared with other materials. Great
range of sizes of rolls manufacturers offer roofing membrane
rolls of varying widths. For example, Carlisle EPDM roofing membranes with a length
on the roll have a width of 30m 3m, 6m, 9m, 12m and 15m, and TPO roofing membranes
Carlisle have a width of 2.44m, 3.05m and 3.66m. It is possible to achieve minimal
the number of seams during installation of the roof membrane and a positive effect on the rate of
installation of roof pie. In the opinion of experienced builders, the team
out of 3 people per shift can lay from 700 to 1,000 square meters. m roof
coverage. Single-layer coating provides 100% waterproof coating for
roof requires only one layer of roofing membrane, is achieved
100% waterproofing under-roof space Nye. Consequently, the consumption
membrane roofing material to a minimum. Compatible with various
When mounting bases membrane roofing on the old coating is not required
special training, as polymeric roofing membrane can be laid
for any reason. Old waterproofing and you can not shoot, even
if there is a need to dry Roofing layers. One of the unique
quality polymeric roofing membrane is a vapor permeability, so
all the moisture remaining in the under-roof space, eventually evaporates.
In this case there is no violation of roofing and do not form "bubbles"
as in the case of, for example, bitumen-deposited
material. Different ways of mounting the roofing membrane fasten Cloths
between a variety of ways. TPO roofing membranes sealed with hot
air by means of special machines. To handle the ground near the engineering
nadkrovelnym structures and curbs to the company proposes to use Carlisle
the so-called liquid roofing membrane which their qualities do not
inferior standard, providing 100% waterproof nuyu in difficult places. Cloths
EPDM roofing membrane overlapping interconnected by means of adhesive
tapes, special adhesives, sealants and mastics. All of the above makes
polymeric roofing membrane by one of the most convenient materials for
roofing, especially flat roofs and roofs of a large area.
Despite the fact that the membrane material is more expensive than asphalt or mastic,
structure and content of membrane roofing costs more economical due to
durability of the material, its resistance to various influences, and
and ease of installation and repair of roofing membranes.

source www.realt5000.com.ua

blog comments powered by Disqus